| MODEL | UNIT | PPM - 30 | |
| INJECTION UNIT | |||
| SHOT WEIGHT (GPPS) | gms | 28 | 45 |
| THEORETICAL DISPLACEMENT | cc | 31 | 49 |
| INJECTION PRESSURE | bar | 1956 | 1252 |
| INJECTION RATE | cc/sec | 23 | 36 |
| INJECTION SCREW STROKE | mm | 100 | 100 |
| SCREW DIAMETER | mm | 20 | 25 |
| SCREW L/D RATIO | n° | 24 | 20 |
| SCREW SPEED | rpm | 250 | 250 |
| PLASTICIZING RATE (GPPS) | gm/sec | 2.4 | 5 |
| NOZZLE DEPTH | mm | 30 | 30 |
| NOZZLE HOLDING FORCE | KN | 1.8 | 1.8 |
| HEATING POWER | kw | 3 | |
| NO OF HEATING ZONE | n° | 4+1 | |
| CLAMP UNIT | |||
| MOULD CLAMPING FORCE | KN | 300 | |
| MOULD OPENING STROKE | mm | 200 | |
| MOULD HEIGHT MIN / MAX | mm | 100/250 | |
| MAX. DAYLIGHT | mm | 450 | |
| DISTANCE BETWEEN TIE ROD | mm | 260X210 | |
| PLATEN SIZE (H X V) | mm | 380X330 | |
| EJECTOR STROKE | mm | 80 | |
| EJECTOR FORCE / RETRACTION FORCE | KN | 1.2 | |
| TOTAL MOULD CARRING CAPACITY | |||
| GENERAL | |||
| ELECTRIC MOTOR | kw | 3.7 | |
| CONNECTED POWER | kw | 6.7 | |
| TOTAL OIL CAPACITY | Ltr | 60 | |
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 25 | |
| MACHINE DIEMENSION (L X W X H) | Mtr | 2.8X1X1.6 | |
| MACHINE WEIGHT | kg | 1350 | |
