| MODEL | UNIT | PPM - 60 | |
| INJECTION UNIT | |||
| SHOT WEIGHT (GPPS) | gms | 62 | 89 |
| THEORETICAL DISPLACEMENT | cc | 69 | 99 |
| INJECTION PRESSURE | bar | 2018 | 1401 |
| INJECTION RATE | cc/sec | 36 | 52 |
| INJECTION SCREW STROKE | mm | 140 | 140 |
| SCREW DIAMETER | mm | 25 | 30 |
| SCREW L/D RATIO | n° | 24 | 20 |
| SCREW SPEED | rpm | 300 | 300 |
| PLASTICIZING RATE (GPPS) | gm/sec | 6 | 9.5 |
| NOZZLE DEPTH | mm | 30 | 30 |
| NOZZLE HOLDING FORCE | KN | 20 | 20 |
| HEATING POWER | kw | 5.25 | |
| NO OF HEATING ZONE | n° | 5 | |
| CLAMP UNIT | |||
| MOULD CLAMPING FORCE | KN | 600 | |
| MOULD OPENING STROKE | mm | 250 | |
| MOULD HEIGHT MIN / MAX | mm | 150/325 | |
| MAX. DAYLIGHT | mm | 575 | |
| DISTANCE BETWEEN TIE ROD | mm | 320X280 | |
| PLATEN SIZE (H X V) | mm | 475X435 | |
| EJECTOR STROKE | mm | 80 | |
| EJECTOR FORCE / RETRACTION FORCE | KN | 1.8 | |
| TOTAL MOULD CARRING CAPACITY | |||
| GENERAL | |||
| ELECTRIC MOTOR | kw | 5.5 | |
| CONNECTED POWER | kw | 10.75 | |
| TOTAL OIL CAPACITY | Ltr | 90 | |
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 25 | |
| MACHINE DIEMENSION (L X W X H) | Mtr | 3.8X1.5X1.8 | |
| MACHINE WEIGHT | kg | 2600 | |
