| MODEL | UNIT | SPM - 125 | SPM - 160 | ||
| INJECTION UNIT | |||||
| SHOT WEIGHT (UPVC) | gms | 381 | 518 | ||
| THEORETICAL DISPLACEMENT | cc | 318 | 432 | ||
| INJECTION PRESSURE | bar | 1473 | 1512 | ||
| INJECTION RATE | cc/sec | 136 | 168 | ||
| INJECTION SCREW STROKE | mm | 200 | 220 | ||
| SCREW DIAMETER | mm | 45 | 50 | ||
| SCREW L/D RATIO | n° | 22.2 | 21.6 | ||
| SCREW SPEED | rpm | 90 | 80 | ||
| PLASTICIZING RATE (UPVC) | gm/sec | 19 | 23 | ||
| NOZZLE DEPTH | mm | 45 | 50 | ||
| NOZZLE HOLDING FORCE | KN | 45 | 3.9 | ||
| HEATING POWER | kw | 11.5 | 15.7 | ||
| NO OF HEATING ZONE | n° | 4+1 | 4+1 | ||
| CLAMP UNIT | |||||
| MOULD CLAMPING FORCE | KN | 1250 | 1600 | ||
| MOULD OPENING STROKE | mm | 380 | 430 | ||
| MOULD HEIGHT MIN / MAX | mm | 180/425 | 200/510 | ||
| MAX. DAYLIGHT | mm | 830 | 940 | ||
| DISTANCE BETWEEN TIE ROD | mm | 425X425 | 510X460 | ||
| PLATEN SIZE (H X V) | mm | 625X625 | 725X675 | ||
| EJECTOR STROKE | mm | 140 | 140 | ||
| EJECTOR FORCE | KN | 50 | 50 | ||
| GENERAL | |||||
| ELECTRIC MOTOR | kw | 15 | 18.5 | 15 | 18.5 |
| CONNECTED POWER | kw | 26.5 | 30 | 30.7 | 34.2 |
| TOTAL OIL CAPACITY | Ltr | 250 | 300 | ||
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 50 | 50 | ||
| MACHINE DIEMENSION (L X W X H) | Mtr | 4.8X1.5X2.2 | 5.0X1.6X2.3 | ||
| MACHINE WEIGHT | kg | 4500 | 5600 | ||
| MODEL | UNIT | SPM - 200 | SPM - 250 | SPM - 325 | |||
| INJECTION UNIT | |||||||
| SHOT WEIGHT (UPVC) | gms | 848 | 1500 | 2287 | |||
| THEORETICAL DISPLACEMENT | cc | 707 | 1154 | 1759 | |||
| INJECTION PRESSURE | bar | 1429 | 1457 | 1472 | |||
| INJECTION RATE | cc/sec | 220 | 259 | 345 | |||
| INJECTION SCREW STROKE | mm | 250 | 300 | 350 | |||
| SCREW DIAMETER | mm | 60 | 70 | 80 | |||
| SCREW L/D RATIO | n° | 20 | 20.3 | 23.4 | |||
| SCREW SPEED | rpm | 80 | 80 | 80 | |||
| PLASTICIZING RATE (UPVC) | gm/sec | 34 | 43 | 50 | |||
| NOZZLE DEPTH | mm | 50 | 50 | 50 | |||
| NOZZLE HOLDING FORCE | KN | 60 | 60 | 73 | |||
| HEATING POWER | kw | 18.8 | 21.3 | 26.5 | |||
| NO OF HEATING ZONE | n° | 4+1 | 6 | 5+1 | |||
| CLAMP UNIT | |||||||
| MOULD CLAMPING FORCE | KN | 2000 | 2500 | 3250 | |||
| MOULD OPENING STROKE | mm | 475 | 580 | 650 | |||
| MOULD HEIGHT MIN / MAX | mm | 200/550 | 250/650 | 300/700 | |||
| MAX. DAYLIGHT | mm | 1025 | 1230 | 1350 | |||
| DISTANCE BETWEEN TIE ROD | mm | 560X510 | 660X610 | 720X660 | |||
| PLATEN SIZE (H X V) | mm | 800X750 | 950X900 | 1025X965 | |||
| EJECTOR STROKE | mm | 180 | 200 | 200 | |||
| EJECTOR FORCE | KN | 50 | 65 | 65 | |||
| GENERAL | |||||||
| ELECTRIC MOTOR | kw | 18.5 | 22 | 22 | 30 | 30 | 37 |
| CONNECTED POWER | kw | 37.3 | 40.8 | 43.3 | 51.3 | 56.5 | 63.5 |
| TOTAL OIL CAPACITY | Ltr | 400 | 450 | 550 | |||
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 50 | 75 | 120 | |||
| MACHINE DIEMENSION (L X W X H) | Mtr | 5.5X1.7X2.5 | 6.3X1.8X2.5 | 7.2X2.0X2.7 | |||
| MACHINE WEIGHT | kg | 7250 | 10800 | 13800 | |||
