| MODEL | UNIT | PPM - 18 |
| INJECTION UNIT | ||
| SHOT WEIGHT (GPPS) | gms | 22 |
| THEORETICAL DISPLACEMENT | cc | 25 |
| INJECTION PRESSURE | bar | 1325 |
| INJECTION RATE | cc/sec | 21 |
| INJECTION SCREW STROKE | mm | 80 |
| SCREW DIAMETER | mm | 20 |
| SCREW L/D RATIO | n° | 20 |
| SCREW SPEED | rpm | 200 |
| PLASTICIZING RATE (GPPS) | gm/sec | 2.4 |
| NOZZLE DEPTH | mm | 30 |
| NOZZLE HOLDING FORCE | KN | 1.8 |
| HEATING POWER | kw | 3 |
| NO OF HEATING ZONE | n° | 4 |
| CLAMP UNIT | ||
| MOULD CLAMPING FORCE | KN | 18 |
| MOULD OPENING STROKE | mm | 200 |
| MOULD HEIGHT MIN / MAX | mm | 100/250 |
| MAX. DAYLIGHT | mm | 450 |
| DISTANCE BETWEEN TIE ROD | mm | 200X200 |
| PLATEN SIZE (H X V) | mm | 300X300 |
| EJECTOR STROKE | mm | 80 |
| EJECTOR FORCE / RETRACTION FORCE | KN | 10 |
| TOTAL MOULD CARRING CAPACITY | ||
| GENERAL | ||
| ELECTRIC MOTOR | kw | 2.2 |
| CONNECTED POWER | kw | 5.2 |
| TOTAL OIL CAPACITY | Ltr | 60 |
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 25 |
| MACHINE DIEMENSION (L X W X H) | Mtr | 2.5X0.9X1.5 |
| MACHINE WEIGHT | kg | 900 |
