| MODEL | UNIT | SPM - 60 | |
| INJECTION UNIT | |||
| SHOT WEIGHT (GPPS) | gms | 53 | 76 |
| THEORETICAL DISPLACEMENT | cc | 59 | 85 |
| INJECTION PRESSURE | bar | 2058 | 1580 |
| INJECTION RATE | cc/sec | 28 | 40 |
| INJECTION SCREW STROKE | mm | 120 | 120 |
| SCREW DIAMETER | mm | 25 | 30 |
| SCREW L/D RATIO | n° | 24 | 20 |
| SCREW SPEED | rpm | 210 | 210 |
| PLASTICIZING RATE (GPPS) | gm/sec | 3.7 | 5.8 |
| NOZZLE HOLDING FORCE | mm | 20 | |
| HEATING POWER | KW | 5.2 | |
| NO OF HEATING ZONE | n° | 4 | |
| CLAMP UNIT | |||
| MOULD CLAMPING FORCE | KN | 600 | |
| MOULD OPENING STROKE | mm | 250 | |
| MOULD HEIGHT MIN / MAX | mm | 150/325 | |
| MAX. DAYLIGHT | mm | 575 | |
| DISTANCE BETWEEN TIE ROD | mm | 320X280 | |
| PLATEN SIZE (H X V) | mm | 475X435 | |
| EJECTOR STROKE | mm | 80 | |
| EJECTOR FORCE | KN | 18 | GENERAL |
| ELECTRIC MOTOR | kw | 5.5 | |
| CONNECTED LOAD | kw | 10.7 | |
| TOTAL OIL CAPACITY | L | 90 | |
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 40 | |
| MACHINE DIEMENSION (L X W X H) | m | 4.2x1.5x2.2 | |
| MACHINE WEIGHT | kg | 3600 | |
