| MODEL | UNIT | SPM - 110 | ||
| INJECTION UNIT | ||||
| SHOT WEIGHT (GPPS) | gms | 154 | 201 | 254 |
| THEORETICAL DISPLACEMENT | cc | 173 | 226 | 286 |
| INJECTION PRESSURE | bar | 2150 | 1700 | 1300 |
| INJECTION RATE | cc/sec | 85 | 111 | 140 |
| INJECTION SCREW STROKE | mm | 180 | 180 | 180 |
| SCREW DIAMETER | mm | 35 | 40 | 45 |
| SCREW L/D RATIO | n° | 22 | 19.2 | 17.1 |
| SCREW SPEED | rpm | 250 | 250 | 250 |
| PLASTICIZING RATE (GPPS) | gm/sec | 13.3 | 18.7 | 26.2 |
| NOZZLE DEPTH | mm | 45 | 45 | 45 |
| NOZZLE HOLDING FORCE | KN | 45 | ||
| HEATING POWER | kw | 8.6 | ||
| NO OF HEATING ZONE | n° | 4+1 | ||
| CLAMP UNIT | ||||
| MOULD CLAMPING FORCE | KN | 1000 | ||
| MOULD OPENING STROKE | mm | 350 | ||
| MOULD HEIGHT MIN / MAX | mm | 150/425 | ||
| MAX. DAYLIGHT | mm | 775 | ||
| DISTANCE BETWEEN TIE ROD | mm | 415X415 | ||
| PLATEN SIZE (H X V) | mm | 615X615 | ||
| EJECTOR STROKE | mm | 100 | ||
| EJECTOR FORCE | KN | 40 | ||
| GENERAL | ||||
| ELECTRIC MOTOR | kw | 11 | ||
| CONNECTED POWER | kw | 19.6 | ||
| TOTAL OIL CAPACITY | Ltr | 210 | ||
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 40 | ||
| MACHINE DIEMENSION (L X W X H) | Mtr | 4.3X1.5X2.2 | ||
| MACHINE WEIGHT | kg | 4500 | ||
