| MODEL | UNIT | PPM - 80 | |
| INJECTION UNIT | |||
| SHOT WEIGHT (GPPS) | gms | 130 | 169 |
| THEORETICAL DISPLACEMENT | cc | 144 | 188 |
| INJECTION PRESSURE | bar | 1837 | 1406 |
| INJECTION RATE | cc/sec | 70 | 90 |
| INJECTION SCREW STROKE | mm | 150 | 150 |
| SCREW DIAMETER | mm | 35 | 40 |
| SCREW L/D RATIO | n° | 22 | 19.2 |
| SCREW SPEED | rpm | 225 | 225 |
| PLASTICIZING RATE (GPPS) | gm/sec | 10.8 | 14.4 |
| NOZZLE DEPTH | mm | 40 | 40 |
| HEATING POWER | KW | 7.3 | 7.3 |
| NO OF HEATING ZONE | n° | 4 | 4 |
| CLAMP UNIT | |||
| MOULD CLAMPING FORCE | KN | 800 | |
| MOULD OPENING STROKE | mm | 310 | |
| MOULD HEIGHT MIN / MAX | mm | 150/365 | |
| MAX. DAYLIGHT | mm | 675 | |
| DISTANCE BETWEEN TIE ROD | mm | 360X260 | |
| PLATEN SIZE (H X V) | mm | 530X530 | |
| EJECTOR STROKE | mm | 100 | |
| EJECTOR FORCE | KN | 40 | GENERAL |
| ELECTRIC MOTOR | kw | 7.5 | |
| CONNECTED LOAD | kw | 14.8 | |
| TOTAL OIL CAPACITY | L | 200 | |
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 40 | |
| MACHINE DIEMENSION (L X W X H) | m | 4.2x1.5x2.2 | |
| MACHINE WEIGHT | kg | 3600 | |
