| MODEL | SPM - 125 | SPM - 160 | SPM - 200 | SPM - 275 | SPM - 325 | |
| INJECTION UNIT | UNIT | SPECIFICATION | ||||
| SHOT WEIGHT (GPPS) | gms | 372 | 505 | 827 | 1350 | 2058 |
| THEORETICAL DISPLACEMENT | cc | 318 | 432 | 707 | 1154 | 1759 |
| INJECTION PRESSURE | bar | 1473 | 1512 | 1429 | 1257 | 1324 |
| INJECTION RATE | cc/sec | 136 | 168 | 220 | 300 | 392 |
| INJECTION SCREW STROKE | mm | 200 | 220 | 250 | 300 | 350 |
| SCREW DIAMETER | mm | 45 | 50 | 60 | 70 | 80 |
| SCREW L/D RATIO | n° | 24 | 24 | 24 | 24 | 24 |
| SCREW SPEED | rpm | 180 | 180 | 150 | 150 | 120 |
| PLASTICIZING RATE (GPPS) | gm/sec | 42 | 50 | 64 | 90 | 115 |
| NOZZLE DEPTH | mm | 45 | 50 | 50 | 50 | 50 |
| NOZZLE HOLDING FORCE | KN | 45 | 3.9 | 60 | 60 | 73 |
| HEATING POWER | kw | 11.5 | 15.7 | 18.8 | 21.3 | 26.5 |
| NO OF HEATING ZONE | n° | 4+1 | 4+1 | 4+1 | 4+1 | 5+1 |
| CLAMP UNIT | ||||||
| MOULD CLAMPING FORCE | KN | 1250 | 1600 | 2000 | 2750 | 3250 |
| MOULD OPENING STROKE | mm | 380 | 430 | 475 | 560 | 650 |
| MOULD HEIGHT MIN / MAX | mm | 180/425 | 200/485 | 200/520 | 250/620 | 300/700 |
| MAX. DAYLIGHT | mm | 805 | 915 | 995 | 1180 | 1350 |
| DISTANCE BETWEEN TIE ROD | mm | 425X425 | 510X460 | 560X510 | 660X610 | 720X660 |
| PLATEN SIZE (H X V) | mm | 625X625 | 725X675 | 800X750 | 950X900 | 1025X965 |
| EJECTOR STROKE | mm | 140 | 140 | 180 | 200 | 200 |
| EJECTOR FORCE / RETRACTION FORCE | KN | 50 | 50 | 50 | 65 | 65 |
| TOTAL MOULD CARRING CAPACITY | ||||||
| GENERAL | ||||||
| ELECTRIC MOTOR | kw | 15 | 22 | 30 | 37 | 45 |
| CONNECTED POWER | kw | 26.5 | 37.7 | 48.8 | 58.3 | 71.5 |
| TOTAL OIL CAPACITY | Ltr | 250 | 300 | 320 | 450 | 575 |
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 50 | 50 | 50 | 75 | 120 |
| MACHINE DIEMENSION (L X W X H) | Mtr | 4.8X1.5X2.2 | 5.0X1.6X2.3 | 5.5X1.7X2.5 | 6.3X1.8X2.5 | 7.2X2X2.7 |
| MACHINE WEIGHT | kg | 4300 | 5600 | 7250 | 10800 | 13800 |
